"G"
class wagons, i.e. covered wagons of the standard type, are
suitable for carrying foodstuffs
and bulk cargo
that requires a large loading capacity.
For its transport, Pol-Rail
uses the G1a and G1c
(two axles) models and the G20
(with 2 two-axle bogies).
G1a - G1c Wagons [two-axle
bogie]
Type: Gbhs Use:
bulk cargo
These two types of wagon are fitted with wooden
floors, 4 securing hooks, 24 load securing rings.
The G1a wagon is
equipped with 16 windows with sliding external curtains
which ensure ventilation, whereas the G1c
model comes with 12 windows instead.
Characteristics
G1a
G1c
Capacity
(m³)
90
90
Floor
surface (m²)
33
33
Loadable
deck length (m)
12.73
12.73
Loadable
deck width (m)
2.62
2.66
Side
doors
1
on each side
1
on each side
Door
opening (h x l) - (m)
2.15
x 2.50
2.15 x 4
2.15
x 4
Wagon
deck height above rail level (m)
1.235
1.235
Length
including bumpers (m)
14.02
14.02
Average
tare weight (t)
14.50
14.50
Carrying
capacity according to rail route category (t)
from
17.5 to 25.5
from
17.5 to 25.5
Number
of EUR pallets that can be carried in a single layer
(cm)
30
(800 x 1200)
24 (1000 x 1200)
30
(800 x 1200)
24 (1000 x 1200)
G20
Wagon [2-two-axle bogies]
Type: Gabs Use:
bulk cargo
The G20 wagon is
fitted with 10 openings in the upper part of the
side walls that ensure proper ventilation in the
carriage. Access for loading operations is gained
through two sliding doors located on each side.
All the wagons of this class are equipped with ventilation
flaps located either at the bottom or at the top
of the wagon.
Characteristics
G20
Model
Capacity
(m³)
137
Floor
surface (m²)
53
Loadable
deck length (m)
20.40
Loadable
deck width (m)
2.59
Side
doors
2
on each side
Door
opening (h x l) - (m)
2.15
x 4
Wagon
deck height above rail level (m)
1.19
Length
including bumpers (m)
21.70
Average
tare weight (t)
27.50
Carrying
capacity according to rail route category (t)
from
37.0 to 53.0
Number
of EUR palettes that can be carried in a single
layer (cm)