T class wagons, featuring a removable cover, are particularly suitable for the transportation of both delicate bulk cargo and large bulky items that need protecting from weather conditions. For transport purposes, Pol-Rail uses the T11 and T18 models (with 2 two-axle bogies).   T11 Wagon   [with 2 two-axle bogies]     Type: Talns Use: bulk solids requiring weather-proof protection This wagon comes with two hoppers, has a removable cover that can be opened across the top and can be unloaded from the bottom, on both sides, fully and simultaneously. The discharge doors are fitted with seals which permit carriage of bulk solids with a diameter of less than 2mm.  Characteristics T11 Model  Capacity (m³) 75  Bottom discharge flaps 2 on each side  Flaps' opening (m) 1.36 x 5.034  Hoppers' size for loading (m) 1.95 x 11.60  Length including bumpers (m) 12.54  Average tare weight (t) 24.50  Carrying capacity according to rail route category (t) from 38 to 65.5   T18 Wagon   [with 2 two-axle bogies]     Type: Tadns Use: cereal transportation The peculiarity of this type of wagon, featuring four hoppers and a cover which is removable from one side, is the controlled discharge of the bulk grains. In addition to the flaps controlled from the small platforms, in fact, the wagon is fitted with eight deflectors, which can be operated individually from the ground, to enable unloading of product both on conveyor belts and in bunkers.  Characteristics T18 Model  Capacity (m³) 80  Bottom discharge flaps 4 on each side  Discharge deflectors 4 on each side  Height of opened discharge flaps above rail level (m) 0.32  Hoppers' size for loading (m) 1.20 x 16.80  Length including bumpers (m) 21.64  Average tare weight (t) 25.50  Carrying capacity according to rail route category (t) from 38.5 to 64.5
Pol-Rail s.r.l. • Via Roma, 43/b - 33100 - Udine (Italy) • Tel 0039 0432 224911 • Fax 0039 0432 295641 • e-mail: info@pol-rail.com